Category:
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
0
1
2
3
4
5
6
7
8
9
Position:IcFull.com » IC Electronic information » Category: M

IC Electronic information

MAX9959: 25V voltage range, 800mA Device Power Supply (DPS)

In Electronic Infomation Category: M | on April 18,2011

MAX9959 for the automatic test equipment (ATE) or other instrument to provide device power (DPS). Small size, high integration and TDA9533 datasheet and flexibility required to make a multi-device MAX9959 ideal for power applications, the economy choice.

MAX9959 has multiple input control voltage, to support the independence of the output voltage setting voltage or current can be set to the maximum and TDA9533 price and minimum value (minimum or maximum is negative polarity). When the load current threshold is set between the two when, MAX9959 is a voltage source; to set the current threshold, will be converted into a smooth precision current source. Has two separate adjustable output voltage clamp circuit, limiting the external level is between the negative and TDA9533 suppliers and positive polarity output voltage.

MAX9959 can provide up to 800mA 25V voltage and current. DPS supports external buffer to source out or absorb a larger current. Multiple MAX9959 can be configured in parallel, sharing the load, thus greater output current, to improve flexibility.

MAX9959 in a variety of load conditions. Programmability allows optimization of setup time, up / down red and stability. Interior can be configured in the event of interference suppression circuit reduces the output range of interference changes.

MAX9959 provides 1mV at 800mA load, load regulation.

MAX9959D detection with an internal 300k resistor (RFS), in RCOMF pin and SENSE pins; MAX9959F the absence of the sense resistor. These devices are 100-pin TQFP package, exposed pad at the top, easy to heat.

Key features

25V output voltage range

programmable current and voltage

Programmable Current Range

200uA

2mA

20mA

800mA

800mA, have 1mV Load regulation

external buffer to provide more current

multiple devices in parallel to provide more current

programmable gain support for a variety of DAC

the device under test (DUT) to detect

can be set to compensate for various load

integration go / no-go comparator

IDDQ test mode

changes in the scope of interference suppression

compact (14mm x 14mm) package

3-wire serial interface

overheat alarm flag and thermal shutdown

Application

Industrial Systems

Memory Detector

structural testing equipment

system on a chip detector

VLSI detector

TDA9533 datasheetTDA9533 suppliersTDA9533 Price

All right reserved:icfull.com © 2010-2016 Certificate