Category:
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
0
1
2
3
4
5
6
7
8
9
Position:IcFull.com » IC Electronic information » Category: M

IC Electronic information

MAX15500/MAX15501: Analog Current / Voltage Output Conditioner

In Electronic Infomation Category: M | on April 18,2011

MAX15500/MAX15501 conditioner provides analog output voltage signal proportional to the programmable control current (maximum 24mA) or voltage (max 12V) output. Usually come from external control voltage DAC, DAC output voltage range of 0 to 4.096V (for the MAX15500), and EPF10K30RC208-4 datasheet and 0 to 2.5V (for the MAX15501). Output current and EPF10K30RC208-4 price and voltage option configured for unipolar or bipolar. In the unipolar configuration, the 5% full scale (FS) have nominal control voltage or 0V 0A output drive capability to achieve due to the range. 100% FS of the control voltage to produce two programmable levels (105% FS or 120% FS), one ultra-range drive capability. MAX15500/MAX15501 with over-current protection and EPF10K30RC208-4 suppliers and output short circuit to ground or supply voltage (up to 35V) of protection. The device also monitors overheating and power supply voltage status, power programmable undervoltage threshold.

MAX15500/MAX15501 via SPI? Interface programming, daisy-chain mode. MAX15500/MAX15501 all the way through the SPI interface and open-drain interrupt output provides a variety of error reporting. The device also provides an analog output to monitor the loaded state.

MAX15500/MAX15501 work in -40 C to +105 C temperature range, the device 32-pin, 5mm x 5mm TQFN package.

Key features

maximum supply voltage of 32.5V

up to 35V output protection

programmable output (plus over-range)

10V

0 to 10V

0 to 5V

20mA

0 to 20mA

4 to 20mA

current output driver 0 to 1k load

voltage output driver as low as 1k load

HART-compatible

2ppm entire temperature range with gain error drift

SPI interface with daisy-chain function

support to +4.096 V (MAX15500) or +2.5 V (MAX15501) full-scale input signal

variety of error reporting

Short-circuit and over current protection

Open circuit detection

BOD

Thermal protection

40us fast settling time

Typical Operating Circuit / Functional Diagram


Application

Distributed I / O

Embedded Systems

Industrial Control and Automation

Programmable Logic Controller (PLC)

data Download: MAX15500-MAX15501.rar

EPF10K30RC208-4 datasheetEPF10K30RC208-4 suppliersEPF10K30RC208-4 Price

All right reserved:icfull.com © 2010-2016 Certificate